SRAM/Truvativ BB30/PF30 Right Arm Bolt and Cap M18/ M30

Bullone di fissaggio del movimento centrale. Identico al l’originale…perfetto;

I lost my extractor cap while riding my 2021 Stumpjumper Expert with Descendant 7K cranks. I later needed to remove my cranks for service and without the extractor I could not remove the right crank arm. This kit worked great and it came with the extractor cap crank bolt and the washer that goes between the cranks and the crank bolt. I tried going to several bike shops with no luck. Save yourself the time and effort of searching around and have this delivered to your home instead. Highly recommended!!!;

Bought this after noticing that the extraction cap on friend's GX Eagle crankset was missing (something that seems to be pretty common on these cranksets). Perfect fit and function and was able to easily remove the drive side crank arm.
Just make sure to put a small amount of blue Loctite on the threads on the cap to prevent it from falling off.;

I have a 2019 YT Capra with TruVativ Descendant cranks. I replaced the chainring with an oval but discovered that I had evidently lost the self-extract piece over the last 3000 miles. This replacement was exactly what I needed to be able to remove my crank. The self-extract piece slides over the screw pice and allows you to screw off the drive side crank. Worked perfectly.

I hate that I had to spend $15 but it worked great. After use I would suggest that you remove the outside disk (self extract piece) and store it somewhere safe so you don't have to rebuy it down the road like I did.;

Confermo che con guarnitura SRAM truvativ 12v offset 3 va bene;